Whew!

After an intense few weeks with little sleep and a lot of leaning on my family, the quilt of Chloe the Marabou Stork is finally done. I won’t make you scroll to the end. Here she is.

kalolifullwp
“Kaloli Moondance,” 63 x 72 inches, 2016 Susan Carlson

The title “Kaloli Moondance” was given to recognize the Ugandan name for the marabou stork Kaloli Bird and the beautiful harvest moon that shone down on those late nights as I was finishing this quilt.

I gave the making of “Kaloli Moondance” a similar time-lapse treatment as “Crocodylus Smylus.” See the video below for a two-minute version of the making of. The rest of this blog gives a more detailed look. Three previous blog posts cover the early stages of the construction. Here are links to Part I, Part II, and Part III.

In the end, this quilt took everything I had, even my blood when I pricked my finger with a needle. I worked right up to the deadline. On the last day, I finished the binding and sleeve, had it appraised (Thanks, Bonnie Dwyer!), photographed (Thanks, my husband Tom!), boxed and delivered to the FedEx drop off with 20 minutes to spare making “Kaloli Moondance” the 11th and final quilt to arrive in Houston for my “Specimens” special exhibit at the International Quilt Festival in early November.

To be fair to myself, some family issues did step in to take away some valuable time, though I do tend to work right up to deadlines anyway. It seems to be part of my creative process. However, the all-nighters are getting a little harder than they used to be!

Speaking of Process”¦

When you last saw Chloe, this is what she looked like:

stork-blog-1

I’d run out of space on my drawing board. It was time to shift her to a larger pinning board. In the photo above I’ve leaned a 6 x 8-foot piece of one-inch styrofoam insulation up against “Crocodylus Smylus,” which was fully occupying my studio pinning wall.

Once Chloe was transferred over, I had enough surface area to finish sketching out her legs and the upper tips of her wing.

stork-blog-2
Transferred to the new board. Wings and legs sketched in.
stork-blog-3
Once I’m happy with the pencil sketch I darken the image with marker.
stork-blog-4
The wing blocked in with all those wonderful fabric scraps.
stork-blog-5
Notice the alternate pencil sketches. It took me a few tries before settling on a final version.
stork-blog-6
Chloe’s “white” legs blocked in.
stork-blog-8
Since I usually gravitate toward bright, bold colors and patterns, I didn’t have many light-colored fabric scraps for the legs. One trick is to use the back of the fabric.
stork-blog-9
Here you can see how much brighter the “right side” of the fabric is.
stork-blog-10
At the very beginning, I had decided to use (0r “scavenge”) only scraps from previous projects for the making of a marabou stork a scavenging bird. When I was ready to move on to the feet, I rummaged for some red scraps”¦
stork-blog-11
”¦and orange scraps.
stork-blog-12
Here’s how I use those pieces, first laying them down as is, without further cutting.
stork-blog-13
Then I trim the edges to fit the design I’ve drawn on the foundation fabric.
stork-blog-14
Chloe’s hind foot, trimmed and glued in place.

During this time, I had a visit from Joel Davidson, husband of one of my students Marilyn Davidson, who also stopped in to see Chloe. Joel is a talented photographer, who had generously allowed me to use his photographs for the design of my stork.

stork-blog-15
Me, Chloe, and Joel.

Background

At some point I’ll have to devote an entire post to backgrounds. In this case, I had decided to continue using only scraps for the background as I did with the stork. But I needed to figure out what scene I was going to place Chloe in. Since marabou storks are native to Africa, it made sense to do a savannah of sorts.

As timing would have it, I was deliberating this background as September’s Full Harvest Moon approached. I was working late and early hours in my studio, walking back and forth to our house in the moonlight. The thought of placing a full moon behind Chloe started to form”¦ then adding the flowing landscape”¦ then spirals to indicate movement of her “dance”.

The challenge of any background is to highlight the main image. This means avoiding colors and shades of color that are of the same value as the image itself. Now, Chloe has both very dark (wings) and very light (belly and legs) parts of her, posing potential problems with a cohesive background.

stork-blog-16
A wide range of values in this bird, made picking fabrics for a background a challenge.
stork-blog-17
The moon sketched behind her head, adding a spiral for interest.
stork-blog-18
Light colors contrast with her face and will help to spotlight that important part of her.
stork-blog-19
A spiral moon with an inner glow.
stork-blog-20
Djinni the cat helped me find even more scraps for use in the background.
stork-blog-21
Then we both went back to “work.”
stork-blog-23
A forest of pins. Time to glue.
stork-blog-26
I keep my squirt bottle handy both for cat training and to take the wrinkles out of crumpled scraps. A quick squirt smooths them right out handier than an iron.
stork-blog-24
Red/golden spiral.
stork-blog-25
Yellow/green spiral.
stork-blog-28
The background blocked in. But we ain’t done yet. Oh, of course not.

Finetuning

When I reach this stage (third draft/”dental draft“/final draft) I often make a list of things that need attention.

There was something about her eye that was bothering me (and Tom). Finally, by comparing her to Joel’s photo, we figured out it had to do with her beak. The opening wasn’t deep enough, which made the eye seem like it was too close to the back of her head.

stork-blog-29
The eye didn’t seem like it was placed correctly.
storkphotodetail
A closer look revealed that the beak opening needed to be deeper. (Ain’t she a beauty?)
stork-blog-31
It may appear I went too far opening her bill, but I still needed to create the inside of her mouth.
stork-blog-32
That’s better. The opening looks correct now. Before the fine-tuning was done, I also added a red eye ridge to help define the eye.

Another area I wanted to enhance was the chest and belly, adding form to the variety of white and pastel colors. Still scrounging through my scrap suitcases, I found several different kinds of lace and other sheers to layer over Chloe’s abdomen, adding some texture to her feathers.

stork-blog-35
Both white and pink lace add texture from chest”¦
stork-blog-33
”¦ to belly ”¦
stork-blog-34
”¦ to bum.

In the photo below notice how the edges of the upper wing feathers are not clearly delineated from the background.

stork-blog-36
The feathers toward the top half of the wing blend in with the background.

I chose to solve that by darkening and adding bright red highlights to the lower edges of the feathers. I don’t suppose it makes literal sense (where does the red light come from?) but it does help keep the wing tips from blending into the background.

stork-blog-38
The pinion feathers edged in red.
stork-blog-40
A golden netting overlaid in the lower half of the wing helps give it fullness and a warmth of color that separates it from the other dark values.

Finishing

Once I’d gone over the image with a fine-toothed comb, I started the finishing process. First I laid the glued image on the (vacuumed) floor of my studio and layered it with thin cotton batting and backing. I used safety pins to baste the layers together for quilting.

stork-blog-41
Djinni oversees the layering of batting and backing (odd yardage of African themed fabric).
stork-blog-43
Front or back, either side of the quilt is acceptable for sitting.
stork-blog-44
Basting on my dressmaker pattern collaged studio floor.
stork-blog-46
I use safety pins for basting.
stork-blog-48
Closing safety pins can be hard on your fingers, especially if you have to do several dozen of them, so I use a burnishing tool from my graphic design days to make it easier.
stork-blog-47
I hook the more pointed end of the burnishing tool under the point of the safety pin to pull it up and into the receiving end.

I quilted the piece using my good old reliable home model 1530 Bernina. But despite being adept at the quilting process, it always takes longer than I think it will.

Once it was quilted, I squared up the piece laying it on the floor, trimming the edges with a rotary cutter, and deciding to use a faced binding. I attached a binding strip to the front of the quilt, top stitched, then turned it to the back, pinned and hand-stitched it in place. In this way the top image goes all the way to the edge.

stork-blog-49
Facings attached to the sides. They’ll be turned to the back and not visible.
stork-blog-50
You may be able to see the overall swirl stipple design I use to quilt my pieces, especially in the moon behind Chloe’s head.

Finish

And that was that. No time for long goodbyes. Off she flew to Houston. And I had only a couple days to rest before hosting the second of my October’s Maine quilting retreats, this one the first held in our state’s largest city of Portland.

When I have time to further reflect on the making of “Kaloli Moondance,” I’m sure that all the stress and lost sleep will begin to fade in my memory. Rather like the labor of childbirth, if we didn’t forget the pain we’d never do it again.

The process of creating isn’t always so laborious, but it is work. Enjoyable work, but a labor nonetheless. What keeps me going is a love of this work. It would have to, wouldn’t it? Otherwise I would never devote hundreds of hours to a single piece.

So, what’s next? What image will capture my attention? Will I do a vulture, the scrappy scavenger I had originally in mind? I have no idea. Let me catch up on some sleep and I’ll let you know.

51 Comments

Leave a Reply to Betty Foley Cancel reply

Your email address will not be published. Required fields are marked *